アズールレーン ノースカロライナ バニーガール STL/ZTL for 3D printing
- 無償版(Free)0 JPY
- 支援版(Support)300 JPY
アズールレーン ノースカロライナ 3Dプリント用 STL/ZTLデータです。 無償版と有償版の中身は同じです。 "Azur Lane" North Carolina 3D printable STL data. Free edition or Chargeable edition are same contents.
★商品内容
分割済み STLファイル パーツ数20 1/7サイズを想定。 顔差分が2つありますので、組み立てに必要なパーツは全19パーツになります。 データは3Dプリンターによる出力を確認済みです。(Mars2 Pro/Syraya Tech Simple) 3Dプリンターを使用して出力する場合は、スライサーソフトを用いて出力用のデータに変換する必要があります。 3Dプリンタやレジンの誤差に対応するため、パーツ同士のダボは浅めとなっており、 ダボ穴だけでは形状維持できません。 軸うち、接着剤での固定が必須です。 特に小さいパーツは勘合がきついか、そのままではハマらないため、 やすり等などでの形状合わせも必要です。
Contents
Divided STL file number of parts 20, 1/7 scale There are 2 face variations, so a total of 19 parts are required for assembly. The data has been tested printing by a 3D printer. (Mars2 Pro/Syraya Tech Simple) When printing using a 3D printer, it is necessary to convert it into data for printing using slicer software. The dowels between the parts are shallow to accommodate the errors of 3D printers and resin, and this figure cannot be stand with just the dowel holes. So must be fixed with adhesive, or shafting. Especially for small parts, the fit is tight or it doesn't fit as it is, so it is necessary to match the shape with a file or the like.
★注意事項
(1.)に記載する以下の行為を禁止します。 1-1 データの再配布。 1-2 データ及び、本データを3Dプリントした物の再販売。 1-3 商用製品への組み込み。 1-4 データの一部を修正して商用製品への取り込み、転用、販売すること。 1-5 本商品のデータ、及び3Dプリントした製品を自作と偽って発表する行為。 (2.)に記載する以下の行為は、「アズールレーン」二次創作に関するガイドラインに則り可能です。 2-1 個人利用(3Dプリント、データ鑑賞等)のための、データ形式変更及び修正。 2-2 クレジットとして販売者を明記した上で、本製品を組み立て、及び塗装した画像等を発表する行為。 データの利用で発生したトラブル、責任は一切負いかねますのでご了承ください。
Attention
The following acts described in (1.) are prohibited. 1-1 Redistribution of data. 1-2 Resale of data, Sale 3D printed figure used this data. 1-3 Incorporation into commercial products. 1-4 Modifying part of the data and incorporating it into a commercial product or diverting, selling. 1-5 Publishing the product data and 3D-printed products falsely as self-made. The following actions described in (2.) are possible in accordance with the "Azur Lane" fan fiction guidelines. 2-1 Data format change and correction for personal use (3D printing, data viewing, etc.). 2-2 Announce rendered images, assembled and painted products, etc, with the credit as “@hogeizc32s” Please note that we are not responsible for any troubles or problems that may arise from the use of data.