PocketSDR NEO* [GNSS]
- 15,000 JPY
当面の製造中止について/Discontinuation of manufacturing for the foreseeable future: PocketSDRの需要はそのニッチな用途のためにそれほど高くありません。そのため、注文を外部に委託することはできず、すべてを手作業でリフローはんだ付けと手はんだ付けを行う必要があります。残念ながら、これはもはや私にとって実行可能なオプションではなく、現在はフルタイムで働いており、注文の履行に時間を見つけるのが難しいです。 The demand for PocketSDRs is not very high due to its niche application. As such, orders can not be outsourced, requiring all to be hand-reflowed and hand-soldered. Sadly this is not a viable option for me anymore and I now work full-time and am having difficulties finding the time to fulfill said orders. そのため、特定のNEO*バリアントをこちらでオープンソース化しました: I have therefore open-sourced the specific NEO* variant here: https://github.com/meh301/PocketSDRNEO この生産ラインの完成にもかかわらず、需要が依然として高い場合は、可能であれば外部委託による製造を検討します。 If demand is still high despite the completion of this production run, I will consider manufacturing more, probably by outsourcing if possible. Unlike the initial run, this NEO* version addresses design flaws of the open-source design, namely the LDO being incorrectly routed, and the RF power divider lacking an isolation resistor (issue #4 on the github page https://github.com/tomojitakasu/PocketSDR/issues/4). Furthermore, I have also taken the liberty to switch the USB port to type-C, and replaced the jumper for antenna power with a polyfuse. Information on the LDO and polyfuse recommendation are graciously provided here https://s-taka.org/en/pocketsdr-production-first-report/. PocketSDRは、東京海洋大学の高須知二教授によるオープンソースのGNSSデータ取得ハードウェアプロジェクトです。ソフトウェアとハードウェアの詳細については、Githubのプロジェクトを参照してください: PocketSDR is an open source GNSS data acquisition hardware project by Professor 高須知二 (Tomoji Takasu) of 東京海洋大学 (Tokyo University of Marine Science and Technology). Please refer to the Github project for details on software and hardware: https://github.com/tomojitakasu/PocketSDR さらに、PocketSDRを中心にした学習資料もこちらにあります: In addition, you can also find learning resources centered around PocketSDR here: https://gnss-learning.org/learning/ 私は4枚の追加ボードを組み立て、プログラムし、テストしました。それらは「現状のまま」提供されます。アンテナは含まれていません。 I have assembled, programmed, and tested four extra boards. They are provided as-is. No antenna is included. アンチスタティックバッグに入れ、パッド入りの封筒で発送します。 Packaged in an anti-static bag and shipped in a padded envelope.
PocketSDRとは何ですか?/ What is PocketSDR?
これは、Maxim Integrated社のMAX2771マルチバンドユニバーサルGNSSレシーバー2つを基にした、L1/L2、L1/L5、L1/L6のデータを同時に取得できるデュアルチャネルGNSS SDRです。設定に基づいて変わります。 It is a dual-channel GNSS SDR based on two Maxim Integrated MAX2771 Multiband Universal GNSS Receivers capable of simultaneous data capture of L1/L2, L1/L5, L1/L6 based on the loaded configuration. https://www.analog.com/jp/products/max2771.html
サポートされる信号 / Supported signals
[Github] GPS: L1C/A, L1CP, L1CD, L2CM, L5I, L5Q, GLONASS: L1C/A, L2C/A, L3OCD, L3OCP, Galileo: E1B, E1C, E5aI, E5aQ, E5bI, E5bQ, E6B, E6C, QZSS: L1C/A, L1C/B, L1CP, L1CD, L1S, L2CM, L5I, L5Q, L5SI, L5SQ, L6D, L6E, BeiDou: B1I, B1CP, B1CD, B2I, B2aD, B2aP, B2bI, B3I, NavIC: L5-SPS, SBAS: L1C/A, L5I, L5Q