るもか Rumoka FaceTrackingAddon
- ダウンロード商品¥ 500






日本語 「るもか / Rumoka」向けのVRChat用フェイストラッキング・アイトラッキングアドオンです。Unityでモデルを選択してインストールメニューを実行すると、設定できます。 【主な機能】 ・口元の表情:口の開閉、上下の歯を見せる表情、笑顔、口をすぼめる表情など。 ・舌の動き:3段階の舌出し、舌巻き、舌先の上下左右の動き。 ・アイトラッキングとケモミミの連動:左右を見ると同じ側の耳が追従し、上下を見ると両耳も適度に動きます。 ・オプションの標準リップシンク:モデルのメニューから切り替えると、発話時にRumoka本来の口形状を使用できます。 【導入前に必要なもの】 ・オリジナルモデル「るもか / Rumoka」:https://booth.pm/ja/items/8495741 ・Unity 2022.3.22f1、VRChat Avatars SDK、VRCFury、vrcft。 ・使用時にはVRChat OSCを有効にし、VRCFaceTracking、対応するトラッキング機器とデバイスモジュールを用意してください:https://docs.vrcft.io 【導入方法】 1. オリジナルのRumokaモデルと必要なSDK・依存パッケージをUnityプロジェクトに導入し、本商品のunitypackageをインポートします。 2. RumokaのPrefabをシーンに配置します。 3. モデルを選択し、Tools → shi_yin FT → Install or Refreshを実行します。完了後、シーンを保存してAvatarをアップロードします。 4. 旧バージョンから更新する場合は、本アドオンを導入済みのRumokaごとにInstall or Refreshを再実行してください。 詳しい手順とトラブルシューティングは、同梱のREADMEをご確認ください。 【購入前にご確認ください】 本商品にRumokaモデル本体、衣装、テクスチャ、個人のシーン、フェイストラッキング機器は含まれません。 インストールツールはオリジナルのRumokaを対象としています。顔のメッシュや骨格を大幅に変更したモデルでは、手動調整が必要になる場合があります。 動作結果は機器、VRCFaceTrackingのモジュール、VRChat OSCの設定によって異なります。 本商品は独立して制作したRumoka向けアドオンです。オリジナルモデルの利用規約、および後日追加される利用規約も遵守してください。 【利用規約】 本商品を購入された時点で、以下に同意したものとみなします。 ・内容物の再配布を禁止します。 ・本アドオンを自身の作品として扱うことを禁止します。 ・商品の性質上、返金および補償には対応していません。 詳細についてはお問い合わせください。 制作・設定:shi_yin(https://shi-yin.booth.pm/) Face tracking blendshapes are animated by Adjerry91's Face Tracking Templates: https://github.com/Adjerry91/VRCFaceTracking-Templates VRCFaceTracking:https://github.com/benaclejames/VRCFaceTracking 【更新履歴】 v1.0.2:販売開始。 注意:内容に相違がある場合は中国語版を優先してください。日本語版と英語版は翻訳です。 中文 「るもか / Rumoka」的VRChat面部捕捉与眼动追踪插件。导入后,在Unity中选中模型并运行安装菜单,即可完成配置。 【主要功能】 ・面捕口型:张嘴、上下露齿、微笑、嘟嘴等表情。 ・舌头动作:三段伸舌、卷舌,以及舌尖上下左右移动。 ・眼追与兽耳联动:向左或向右看时,同侧耳朵跟随;上下看时双耳适度跟随。 ・可选原生说话口型:通过模型菜单切换,讲话时可使用Rumoka原本的发音口型。 【使用前准备】 ・原版「るもか / Rumoka」模型:https://booth.pm/ja/items/8495741 ・Unity 2022.3.22f1、VRChat Avatars SDK、VRCFury、VRCFT。 ・使用时需启用VRChat OSC,并准备VRCFaceTracking、对应的追踪设备及设备模块:https://docs.vrcft.io/ 【安装方法】 1. 先将原版Rumoka、所需SDK及依赖导入自己的Unity工程,再导入本商品的unitypackage。 2. 把Rumoka的Prefab放进场景。 3. 选中模型,点击Tools → shi_yin FT → Install or Refresh。完成后保存场景并上传Avatar。 4. 从旧版更新时,对每个已安装本适配的Rumoka再执行一次Install or Refresh。 完整操作步骤与排错说明请参阅包内README。 【购买前请确认】 本商品不包含Rumoka模型本体、服装、贴图、个人场景或面捕硬件。 安装工具面向原版Rumoka;大幅修改过面部网格或骨架的版本可能需要自行调整。 面捕效果也取决于设备、VRCFaceTracking模块及VRChat OSC的配置。 本商品是独立制作的Rumoka适配资源,请同时遵守原模型与后续补充的使用条款。 【使用条款】 购买本产品即表示您同意: ・不得重新分发内容。 ・不得将此插件当作自己的作品。 ・由于商品属性特殊,不支持退款与补偿。 如需更多信息,请联系我。 制作与配置:shi_yin(https://shi-yin.booth.pm/) Face tracking blendshapes are animated by Adjerry91's Face Tracking Templates: https://github.com/Adjerry91/VRCFaceTracking-Templates VRCFaceTracking:https://github.com/benaclejames/VRCFaceTracking 【更新记录】 v1.0.2:开始销售。 特别提示:如有内容差异,请以中文为准;日语与英语版本均为翻译。 English A VRChat face-tracking and eye-tracking add-on for “Rumoka / るもか.” After importing it, select the avatar in Unity and run the installation menu to configure the add-on. 【Requirements】 ・The original “Rumoka / るもか” avatar: https://booth.pm/ja/items/8495741 ・Unity 2022.3.22f1, VRChat Avatars SDK, VRCFury, and VRCFT . ・For use in VRChat, enable OSC and prepare VRCFaceTracking, a compatible tracking device, and its device module: https://docs.vrcft.io 【Installation】 See the included README for full instructions and troubleshooting. 【Before purchasing】 This product does not include the Rumoka avatar, outfits, textures, personal scenes, or face-tracking hardware. The installer is designed for the original Rumoka avatar. Versions with substantial face-mesh or armature changes may require manual adjustments. Results also depend on your hardware, VRCFaceTracking module, and VRChat OSC configuration. This is an independently made add-on for Rumoka. Please follow the original avatar’s terms of use and any additional terms published later. 【Terms of use】 By purchasing this product, you agree that: ・You may not redistribute its contents. ・You may not present this add-on as your own work. ・Due to the nature of this product, refunds and compensation are not available. Please contact me if you need more information. Created and configured by shi_yin (https://shi-yin.booth.pm) Face tracking blendshapes are animated by Adjerry91's Face Tracking Templates: https://github.com/Adjerry91/VRCFaceTracking-Templates VRCFaceTracking: https://github.com/benaclejames/VRCFaceTracking 【Changelog】 v1.0.2: Initial release. If the translations differ, the Chinese version takes precedence. The Japanese and English versions are translations.






